EQ Series – 2in1 Cleaning Tablets TZ80001A

Contents

10 Siemens EQ 2in1 Cleaning Tablets, 2,2 grams each.
Clean your Siemens EQ Series coffee machine 10 times.

Why use Siemens 2in1 Cleaning tablets?

Siemens EQ series 2in1 cleaning tablets remove coffee oils and other coffee residues from your Siemens EQ Series coffee machine.
> Improves life span of the machine
> Free of coffee residues
> Coffee tastes better
> Specially developed for Siemens EQ series

Description

The Siemens EQ.series 2-in-1 cleaning tablets are the ultimate solution for the coffee residues in your precious Siemens EQ coffee or espresso machine. These cleaning tablets remove all coffee fats, coffee oils and other coffee residues from your Siemens EQ appliance. This prolongs the life of your Siemens appliance. In addition, the 2-in-1 function provides an extra protective layer. This protective layer protects the coffee pipes and moving parts within your Siemens EQ machine. Siemens EQ.series 2-in-1 cleaning tablets are completely safe and reliable in your Siemens EQ coffee machine.

Siemens EQ.series 2-in-1 cleaning tablets are suitable for all Siemens EQ coffee machines, including the following models:
Siemens EQ3, Siemens EQ6, Siemens EQ9, Siemens EQ6 Plus, Siemens EQ.6 Plus S800, Siemens EQ9 S300, Siemens EQ.9 S500, Siemens EQ9 S500, Siemens EQ 300, Siemens EQ3 S100, Siemens EQ4, Siemens EQ400, Siemens EQ 500, Siemens EQ6 S100, Siemens EQ6 S500, Siemens EQ6 700, Siemens EQ6 Plus S300, Siemens EQ7 Plus, Siemens EQ7, Siemens EQ 700, Siemens EQ8 series 600, Siemens EQ8695, Siemens EQ8, Siemens EQ8681, Siemens EQ8693, Siemens EQ872DV01R, Siemens EQ8 series 900, Siemens EQ8 series 300, Siemens EQ9 S700, Siemens EQ9 Plus, Siemens EQ9 400, Siemens EQ9865, Siemens EQ6 Plus S800.

Recommendation

The Siemens Cleaning tablets do not have a descaling effect. For that, purchase the Eccellente Descaling tablets for Siemens.

Instructions

Your Siemens EQ espresso machine can be descaled and cleaned at the same time. Below are the instructions:

1. Hold down the Calc’nClean button for 5 seconds.
2. Open the machine, remove the drip tray and coffee grounds container and rinse them clean.
3. Remove and clean the brewing group.
4. Insert a Siemens EQ.series 2-in-1 cleaning tablet into the brewing group and refit the brewing group.
5. Refit the drip tray and coffee grounds container and close the machine.
6. Remove the water filter (if present).
7. Fill the empty water tank to the mark with 0.5 l lukewarm water and dissolve a Siemens EQ.series 2-in-1 descaling tablet in it.
8. Put the tank back and place a large bowl (approx. 1 l) under the spout.
9. Calc’nClean flashes, touch it. The programme starts, cleans and descales the appliance.
10. Calc’nClean pulses. This process takes about 20 minutes.
11. Empty the bowl, open the machine, empty the drip tray and reinsert it.
12. Close the door and place bowl under the spout.
13. Clean the water tank and reinsert the water filter (if you have removed it).
14. Fill the water tank with fresh water up to the “max” mark and place the bowl back under the spout.
15. Calc’nClean flashes, touch Calc’nClean. The programme starts, cleans and rinses the appliance.
16. Calc’nClean pulses. This process takes about 20 minutes again.
17. Empty, clean and reinsert the drip tray and coffee grounds container. The programme is finished. The machine is again fully ready for use!

Cleaning only:
If your Siemens EQ appliance only needs cleaning, you can follow the operating instructions of your machine.